To be the industry standard by which quality in roofing is compared, where the value we provide our customers is not only measured by our workmanship, service, timely completion and profitability of jobs, but also by our honesty, integrity, enduring relationships, and our unwavering commitment to the safety of our employees and the occupants of the buildings upon which we work.
Arizona Roofing Contractors Association 2008 CONTRACTOR OF THE YEAR
SCF Arizona “Best of the Best” Award for WORKPLACE SAFETY
2004, 2006, 2007, 2008, & 2009
Arizona Business Magazine
1999, 2000, 2008, & 2009 TOP 10 INDUSTRY RANKING
Design freedom. Structural integrity. AEP Span is a leading manufacturer of architectural metal products, offering performance rated structural roof and siding. AEP Span affords the architectural community uncompromised design flexibility and freedom of expression by allowing architects to design and specify roofing and framing systems for new construction and re-roofing applications. AEP Span blends traditional design with contemporary technology and tested values. The innovative thought that goes into the product design, customer service and consideration for the installer is what makes AEP Span's roofs and walls protect not only buildings, but reputations.
AEP Span has long been recognized as an industry innovator, especially noted for the first family of snap-together UL-90 rated architectural metal roof system that could be installed over a solid substrate or open framing. This system along with its factory sealed joint system remains one of the most imitated innovations in the steel roofing market today. The introduction of factory curved roof systems, tapered roof formations, along with on-going weathertightness studies has kept AEP Span roof systems on the cutting edge of performance.
Products
Features / Benefits
Wider coverage means fewer panels to handle and install, saving time and money.
Panel design provides superior load and span capacities which often allow savings in the structural support system.
Quick, economical trim packages available as standard trim pieces that can be ordered by number.
High tensile steel panels in 26 gauge available in a variety of cool colors with DuraTech®nt coating or unpainted Zincalume® or Galvalume® Plus.
Exceptional value in high tensile steel 29 gauge panels coated with the ColorGuardxt coating system. Choose from Surf White, Desert Beige, Lightstone or Zincalume® or Galvalume® Plus for unpainted applications.
Fiberglass panels are available in matching profile.
Fits a variety of building solutions: new construction, renovation, economical mansards or equipment screens.
Manufactured in Fontana, CA.
Features / Benefits
Wider coverage means fewer panels to handle and install, saving time and money.
Long spanning capability; design provides superior load and span capacities, saving money in structural support.
Quick, economical trim packages available as standard trim pieces that can be ordered by number.
High tensile steel panels in 26 gauge available in a variety of cool colors with DuraTech®nt coating or unpainted Zincalume® or Galvalume® Plus.
Exceptional value in high tensile steel 29 gauge panels coated with the ColorGuardxt coating system. Choose from Surf White, Desert Beige, Lightstone or Zincalume® or Galvalume® Plus for unpainted applications.
Fiberglass panels are available in matching profile.
Recommended minimum slope of 1:12.
Manufactured in Fontana, CA and Tacoma, WA.
Features / Benefits
Wider coverage means fewer panels to handle and install, saving time and money.
Quick, economical trim packages available as standard trim pieces that can be ordered by number.
High tensile steel panels in 26 gauge available in a variety of cool colors with the DuraTech®nt coating or Zincalume® or Galvalume® Plus for unpainted applications.
Exceptional value in high tensile steel 29 gauge panels coated with the ColorGuard®xt coating system. Choose from Surf White, Desert Beige, Lightstone or Zincalume® or Galvalume® Plus for unpainted applications.
Fiberglass panels are available to match the profile of the metal panels.
Manufactured in Fontana, CA and Tacoma, WA.
Features / Benefits
Klip-Rib® has been tested in accordance with UL580 and meets UL Class 60 wind uplift requirements.
Has been tested for air infiltration per ASTM E1680, and water infiltration per ASTM E1646.
Can be installed over solid substrates or spaced support members.
Integral ribs have the bold appearance of a batten, but without separate snap-on battens. Preferred for high visibility applications with less likelihood of oil canning than panels with wide flat areas.
Klip-Rib's locking seam reduces field labor by eliminating field seaming.
Its patented 21-gauge clip engages two ribs and allows panels to be disengaged if needed.
Can be installed on pitches as low as 1:12.
Readily available in Zincalume® or Galvalume® Plus for unpainted applications, also available in variety of colors in the DuraTech®nt coating system.
Manufactured in Fontana, CA and Tacoma, WA.
Features / Benefits
Panel design provides superior load and span capacities, offering savings in the structural support system.
Quick, economical trim packages include standard trim pieces that can simply be ordered by number.
ICC Diaphragm Shear Values when used with TEK screws.
High tensile steel panels in 26 gauge available in a variety of cool colors with DuraTech®nt coating or unpainted Zincalume® or Galvalume® Plus.
Exceptional value in high tensile steel 29 gauge panels coated with the ColorGuard®xt coating system. Choose from Surf White, Desert Beige, Lightstone or Zincalume® or Galvalume® Plus for unpainted applications.
Fiberglass panels are available to match the profile of the metal panels.
Recommended Minimum Slope of 1:12.
Manufactured in Tacoma, WA.
Features / Benefits
Weathertight 3 inch high standing seam with concealed clips and fasteners.
Tested in accordance with ASTM E1680 (air infiltration) and ASTM E1646 (water infiltration).
Ideal for both new and retrofit construction.
Factory mutual approved. Class 1-60 (5'-0" spacing) and Class 1-90 (4'-0" spacing).
Has been tested in accordance with ASTM E1592 (wind uplift).
Has been tested in accordance with UL580 (class 90) and meets UL90 wind uplift requirements.
Floating roof clips allow for movement to accommodate thermal expansion on very long runs.
Factory-applied seam and clip sealant assures a weathertight and fast installation.
Choose from three different seam configurations (RollLok, TripleLok, or QuadLok) depending on project requirements.
MultiLok-24 system includes trim and accessories.
An 18" wide modular panel is offered for a clean finish at the rake.
Recommended minimum slope of 1/4":12.
Manufactured in Tacoma, WA.
Weathertight warranty available. Minimum slope required. Contact AEP Span representative for more information. (Roof application ONLY)
Features / Benefits
Deep corrugations provides bold aesthetic shadow effects.
Available in 26 gauge in a variety of standard cool colors with the DuraTech®nt coating system. Also available in bare Zincalume® or Galvalume® Plus.
Quick, economical trim packages available as standard trim pieces that can be ordered by number.
Strength of design allows longer spanning or greater allowable loads.
Fiberglass skylight panels are available to match the profile of the metal panels.
Has been tested for air infiltration per ASTM E-1680, and water infiltration per ASTM E-1646.
Recommended minimum slope of 3:12.
Manufactured in Fontana, CA.
Features / Benefits
Super-Span has been tested in accordance with UL-580 and meets UL Class 90 wind uplift test requirements.
Structural spanning allows panel to be installed over solid substrates or spaced support memebers.
Provides traditional metal roof or wall appearance with 1-1/4" high trapezoidal major ribs at 12" on center with one minor rib between each major rib.
Tested for air infiltration per ASTM E-1680, and water infiltration per ASTM E-1646 (with field-applied side-lap sealant).
Manufactured with high tensile steel for greater load capability.
Matching trim packages are vailable in the same gauge and color as the roof panel.
Fiberglass skylight panels are available in the matching profile.
Can be installed on pitches as low as 1:12 with field applied mastic.
Can be crimp curved to accommodate radiused applications.
26 gauge Super-Span® available in a wide variety of standard cool colors with the DuraTech®nt coating system. Also available in bare Zincalume® or Galvalume® Plus.
22 and 24 guage Super-Span® is also available in a wide variety of standard DuraTech® 5000 cool colors.
