Our Mission

To be the industry standard by which quality in roofing is compared, where the value we provide our customers is not only measured by our workmanship, service, timely completion and profitability of jobs, but also by our honesty, integrity, enduring relationships, and our unwavering commitment to the safety of our employees and the occupants of the buildings upon which we work.


Arizona Roofing Contractors Association
2008 CONTRACTOR OF THE YEAR

SCF Arizona “Best of the Best” Award for
WORKPLACE SAFETY
2004, 2006, 2007, 2008, & 2009

Arizona Business Magazine
1999, 2000, 2008, & 2009
TOP 10 INDUSTRY RANKING


Standing Seam Metal Roof Systems

When you’re design requires a roofing system that is both aesthetically pleasing and structurally sound, choose one of MBCI’s six standing seam metal roof systems. An SSR system from MBCI is one of the most durable and weathertight roof systems available in the industry.

MBCI offers two types of standing seam metal roof systems: vertical leg structural standing seam metal roof systems and trapezoidal structural standing seam metal roof systems.

Vertical Leg Structural Standing Seam Metal Roof Systems
The LokSeam®, BattenLok® HS, SuperLok® and Curved BattenLok® standing seam metal roof systems blend the aesthetics of an architectural panel with the strength of the structural panel. These panels have earned several UL uplift ratings, assuring the reliability of performance. They also provide flexibility to meet design challenges.

Each of these standing seam metal roof systems is designed to be installed over open framing. However, the MBCI LiteFrame®, 5/8-inch plywood or a composite roof assembly may be used as alternate substructures. LokSeam® must be installed on roof slopes of 3:12 or greater. BattenLok® HS and SuperLok® must be installed on roof slopes of ½:12 or greater. Curved BattenLok® can be installed on Radii down to 20’.

Trapezoidal Structural Standing Seam Metal Roof Systems
The snap-together system, Ultra-Dek®, and field-seamed system, Double-Lok®, were designed from concept to completion for strength, durability and weatherability. The standing seams are three inches above the lowest part of the panel, well above the water level as it flows off the roof.

The rake/gable at both ends of each roof system finish with a 3-inch high standing seam, avoiding the necessity of finishing in the low, flat part of the panel where the greatest possibilities for leaks occur in many other systems.

Ultra-Dek® and Double-Lok® panels can be installed before or after the exterior walls are in place. All trim is attached after the roof is installed. With a recommended minimum slope of ¼:12, these standing seam metal roof systems can be used on all types of construction, including metal, masonry or wood, for either new construction or retrofit.

Concealed Fastening Systems
All of MBCI’s standing seam metal roof systems are concealed fastened systems. A choice of concealed fastened clips is available for each vertical leg system, including UL-rated clips. These clips hold the panels firmly in place without unsightly exposed fasteners. Each clip system offers the ability to accommodate thermal movement.

The standard offering for the Ultra-Dek® and Double-Lok® systems is a sliding clip that allows for thermal movement. A 4-inch sliding clip is available for the Double-Lok® system, which in many cases, can eliminate roof steps on a double slope building up to 900 feet wide or a single slope building up to 450 feet wide. These clips are available in high and low versions for use with different thicknesses of vinyl-backed fiberglass insulation. A 2” stand off clip is also available for the Double-Lok roof system. This clip allows the placement of 6” of fiberglass insulation and 1” thermal spacer between the roof panel and the purlin or joist, a requirement for several climate zones under he new energy codes.

Uplift Ratings
Each standing seam metal roof system carries the Underwriters Laboratories Fire Resistance and Wind Uplift (UL 90) ratings covering a wide range of roof designs. In addition, the Double-Lok® and SuperLok® systems meet a variety of ratings as tested under FM Global Corporation Standard 4471. The BattenLok® HS, SuperLok®, Curved BattenLok® and Double-Lok® systems have met all test requirements specified in CEGS 07416 / ASTM E 1592 Standing Seam Metal Roof System guide specification.

Weathertight Roof Systems
Special clips are available allowing for thermal roof expansion and contraction during extreme temperature changes. All trim is both weathertight and aesthetically pleasing, giving the roof a nice finished appearance.

Factory-applied sealant in the panel sidelap ensures a tight, secure weathertight lap whether it is a snap-together or field-seamed system.

NOTE: As with all standing seam metal roof systems, sound attenuation (e.g. blanket insulation) is required between the panel and the substructure to prevent “roof rumble” during windy conditions. Some composite roof systems may require additional acoustical consideration to ensure that thermal vibration noises are isolated from the building’s interior. Contact your architect and/or engineer for proper acoustical design.

Curved BattenLok®

When your roof calls for a curved standing seam metal roof, Curved BattenLok® is an ideal choice. The Curved BattenLok® profile is a water shedding, curved standing seam metal roof system with a 2-inch tall standing seam that is field-seamed during the installation process. Striations are standard and added for aesthetic value.

Curved BattenLok® may be curved to a minimum radius of 20 feet. Curved BattenLok® is a structural roofing panel and may be installed directly over purlins or joists. This curved standing seam metal roof system also may be installed over wood decks and metal decks with rigid insulation. Open framing applications eliminate costly curved deck surfaces and membrane underlayments. For large projects and/or long panels, the curving process for the curved standing seam metal roof system may best be accomplished at the job site.

Curved BattenLok® Product Information

  • Coverage Width – 16”
  • Panel Attachment – Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
  • Gauge – 24 (standard)
  • Finishes – Smooth Striated (standard)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.


BattenLok® HS

BattenLok® HS is a mechanically field-seamed, high strength structural standing seam roof system. The BattenLok® HS panels have a 2” tall vertical seam and are available in both 12-inch and 16-inch widths. BattenLok® HS can be installed directly over purlins or bar joists and is capable of transitioning from roof to fascia. BattenLok® HS does not require a solid substructure for support.

BattenLok® HS Product Information

  • Coverage Width – 12”, 16”
  • Minimum Slope – ½:12
  • Panel Attachment – Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
  • Gauges – 24 (standard); 22 (optional)
  • Finishes – smooth striated (standard); embossed striated and smooth, embossed striated with pencil ribs (optional)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.


SuperLok®

SuperLok® is a mechanically field-seamed, vertical leg standing seam roof system that combines a 2” tall slim rib with exceptional uplift resistance. It is available in both 12-inch and 16-inch widths. SuperLok® has been designed to withstand the most rigorous weather conditions. SuperLok® can be installed directly over purlins or bar joists. SuperLok® does not require a solid substructure for support.

SuperLok®Product Information

  • Coverage Width – 12”, 16”
  • Minimum Slope – ½:12
  • Panel Attachment – Concealed Fastening System; Low, High (fixed or floating), Utility (no insulation clearance)
  • Gauge – 24 (standard); 22 and 26 (optional)
  • Finishes – Smooth Striated (standard); Embossed Striated (optional)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.

 Bare Galvalume & Galvalume Plus Warranty

 Signature 200 Paint Warranty

 Signature 300 Paint Warranty

 Technical Bulletin-Saltwater and Marine Atmospheres


LokSeam®

LokSeam® is a snap-together standing seam roof system with a 1 3/4” tall vertical rib, for use on roofs with a minimum slope of 3:12.LokSeam® panels are available in 12-inch, 16-inch and 18-inch widths. LokSeam® panels can be installed over open framing or a solid substructure and are capable of transitioning from roof to fascia with the use of a rib cover. LokSeam® does not require a solid substructure for support.

LokSeam® Product Information

  • Coverage Width – 12”, 16”, 18”
  • Minimum Slope – 3:12
  • Panel Attachment – Concealed Fastening System, Standard and UL90 Clips
  • Gauge – 24 (standard); 22 (12”, 16”, 18”), 26 (12”) (optional) Finishes – Striated (standard); Embossed Striated (optional)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.


Ultra-Dek®

The Ultra-Dek® roof panel is a snap-together, trapezoidal leg standing seam roof system. Ultra-Dek® panels are available in 12-inch, 18-inch and 24-inch widths. Ultra-Dek® requires a minimum slope of ¼:12 and is ideal for industrial, commercial and architectural applications. Ultra-Dek® can be erected on various types of construction.

Ultra-Dek® Product Information

  • Coverage Width – 12”, 18”, 24”
  • Minimum Slope – ¼:12
  • Panel Attachment – Concealed Fastening System; Low, High, Fixed and Sliding
  • Gauge – 24 (standard); 22, 26 (optional)
  • Finishes – Smooth (standard); Embossed (optional)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.


Double-Lok®

The Double-Lok® roof panel is a mechanically field-seamed, trapezoidal leg standing seam roof system. Double-Lok® panels are available in 12-inch, 18-inch and 24-inch widths. Double-Lok® requires a minimum slope of ¼:12. Double-Lok® panels are ideal for industrial, commercial and architectural applications.

Double-Lok® Product Information

  • Coverage Width – 12”, 18”, 24”
  • Minimum Slope – ¼:12
  • Panel Attachment – Concealed Fastening System; Low, High, Fix and Sliding and a 2” stand off clip
  • Gauge – 22 and 24
  • Finishes – Smooth (standard); Embossed (optional)
  • Coatings – Galvalume Plus®, Signature® 200, Signature® 300, Signature® 300 Metallic
Colors
Black Buckskin Burgundy Burnished Slate
Charcoal Gray Crimison Red Desert Sand Fern Green
Gallery Blue Gray Hawaii Blue Ivory
Ivy Green Koko Brown Light Stone Marine Green
Polar White Regal White Rustic Red Saddle Tan

MBCI Warranties

MBCI offers both finish warranties and weathertightness warranties. The finish warranties include the Bare Galvalume® and Galvalume Plus® Warranty, the Signature® 200 and Signature® 300 paint warranties and a Technical Bulletin about Saltwater and Marine Atmospheres.

MBCI offers several different types of weathertightness warranties and was the first company in the metal roofing industry to offer a Single Source™ warranty. Single Source™ Warranties put the complete burden for proper installation of the roof system* on MBCI from the date of substantial completion. MBCI offers three levels of Single Source™ Warranties depending on the level of project the building owner requires.

*Roof system is defined as the MBCI furnished roof panels, flashing and related items used to fasten the roof panels and flashing (including roof jack and curb attachments pre-approved in writing by MBCI) to the roof structure.